Water cooled Brake

Industrial	Brickworks	Paper	Mining	Marine	Offshore

Home

Profile

Products

Services

Location

Contact

Tensioning brakes and clutches suitable for paper, foil and converting industries

United Kingdom distributors of Wichita brakes, clutches and combined units

Relining services for crane, hoist and lifting equipment

Characteristics:

	Pneumatically applied - spring release
	Water cooled for good heat transfer
	1, 2, 3 or 4 disc design
	Standard or Low Coefficient (LC) friction pads for various torque requirements
	Multi-range actuators for optimum torque selection optional on some sizes
	For use in dry environment only

Utilisation:

End-of-shaft or through shaft mounting

Typical Uses:

	Continuous slipping and tension control applications
	Heavy duty stopping and holding applications
	Fast engagement and cyclic applications

Mounting Precautions:

	Outer ring of brake must be supported by machine frame
	Inner hub of brake must be supported by machine shaft
	Designed for horizontal shaft axis. Consult Wichita if vertical mounting is required
	Maximum water inlet pressure is 4.5 bar

Saftey:

The brake should be suitably guarded when in use

The following datasheet (PDF file) will provide product specifications and information for the Water Cooled Brake

"Solving Industries Braking Point"

info@frictioncomponents.co.uk

Contact us now for guidance and advice, or to discuss a specific project, by telephone on 01254 397561, by fax on 01254 389722 or by email at info@frictioncomponents.co.uk

Friction Components and Systems Ltd - Solving Industries Braking Point
Maudsley Mill, Maudsley Street, Accrington BB5 6AD

part of the Friction Components and Systems group of companies